Aggregate Testing Lab Equipment
Los Angeles Abrasion Testing Machine Manufacturers

Los Angeles Abrasion Testing Machine

Make: AMV Scientific Co.

Model: AMV-AE-6004

Origin: India

AMV scientific Los Angeles abrasion testing machine manufactures, suppliers and exporters in Delhi, India for laboratories that can use them for developing highly consistent. Los Angeles abrasion testing machine is used to determine the resistance of aggregates to abrasion. Used to measure the degradation of mineral aggregates of standard gradings resulting from a combination of actions including abrasion or attrition, impact, and grinding in a rotating steel drum containing a specified number of steel spheres.

Los Angeles Abrasion Testing Machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test.

Los Angeles abrasion testing machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test. A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 R.P.M. A revolution counter is fitted to the frame. A tray is supplied for collection of the material at the end of the test. Complete with Abrasive Charge consisting of a set of Twelve hardened steel balls, approximately 48mm dia.

Los Angeles Abrasion Testing Machine Main Features:

  • The tester should be mounted on flat and firm concrete bed and fix it with base screws.
  • After connected power, trigger the switch (preset revolution: 1r/min.) to check if the rotating direction of the tester accords with the narrow direction.
  • After preset revolutions, switch on and check if it will stop automatically according to the revolutions to be preset.
  • After finished the calibration, put the steel balls and stone material into the cylinder and close the cover of the tester well, to set revolutions and then start the test.
  • Machine operation on 440 V, 3 Phase, 50 cycles, A.C. Supply

We offer a comprehensive range of Los Angeles abrasion testing machine manufacturers, suppliers and exporters in Delhi, India of material testing, quality control, and research. our product line includes but is not limited to.