Semi Automatic Compression Testing Machine Power Pack Type
Make: AMV Scientific Co.
Model: AMV-CTE-20037
Origin: India
Semi-Automatic Compression Testing Machine, split, and flexural strengths are determined using machines. These tests are often conducted on materials having a high compressive strength but a low tensile strength, in which the specimen is subjected to increasing compressive pressures until the machine detects failure.
Specification
Capacity: 500,1000, 2000 & 3000kN 1000, 2000 & 3000kN
The Semi-automatic compression testing Machine with an advanced and intelligent screen touch digital indicator with manual pace rate controller system. User-friendly machine that facilitates and smoothens the process with manual pace rate control, data interface, Graph, data printing, load hold with in-built portable printer etc.
In this machine its sufficient to press only start button to complete test and get result in N/mm2 and Kg/cm2. Our semi-automatic compression testing machines consist of a rigid two column plate type frame, hydraulic power with rapid approach and fine-tuning system for manual pace rate control.
The main characteristics are:
- High stability welded assembly
- Piston stroke with safety limit switch
- Platen hardness of min 55 HRC
- Distance pieces and safety door included
- Ball seating assembly and frame tested for stability
Power Pack
Semi-Automatic Cement Compression Testing Machines fully controlled power pack, by a pressure rate control valve, is designed to supply the required oil to the load frames for loading. The Cement compression power pack can load different frames with required pace rates and equipped with safety maximum pressure valve to avoid machine overloading and our rapid approach pump is supplied as standard quality.
Pumping Unit: We provide single and double speed pump facilitates rapid approach of the platens for daylight closure and provides comprehensive control over the application of load.
Motor: We provide dual pump power driven an AC motor 220 V (110 V), 50-60 Hz single phase and 0.55 kW
Touch Screen HMI:
- Peak Load, Peak Stress, Unique Record No. is displayed.
- Menu Driven Sample Details.
- Data Download thru RS232.
- Peak stress calculation based on sample type and shape.
- Easy to operated.
- Start, Stop, Pause and Reset.
- Touch Screen Keyboard.
Load Frame Specifications:
A fully welded loading frame comes with a top crosshead, base and solid side walls with the precision ground hydraulic piston fixed to the base of the machine. Also, the machine is super empowering for it works by using rapid approach pump that allows the fast approach of platens, for daylight closure and allows automatic, precise control over the load application. There is also a display of pace rate bar which gives timely feedback to the operator on the loading rate. Distance pieces, and removable transparent front-rear safety doors
Specifications:
- Capacity (In kN): 1000 kN
- Pressure Gauge (In kN): 1000 kN
- Least Count (In kN): 5 kN
- Pressure Gauge Diameter (mm): 150
- Vertical Daylight (mm): 320 (Adj)
- Horizontal Clearance (mm): 260
- Platen Size (mm): 220 x 165
- Ram Diameter (mm): 165
- Ram Travel (mm): 50
- Cube: 100mm, 150 mm
- Cylindrical: 100 mm x 200 mm, 150 mm x 300 mm
- Brick: 100 x 100 x 220 mm
Model | Unit | AMV-CTE-20038-A | AMV-CTE-20038-B |
Standard | IS14858:2000 | IS14858:2000 | |
Ram dia meter | mm | 205 | 250 |
Least Count | kN | 0.1 | 0.1 |
Ram Travel | mm | 60 | 60 |
Lower platensdimensions | mm | Ø280 | Ø310 |
Upper platensdimensions | mm | Ø280 | Ø310 |
Maximum verticalclearance betweenplatens | mm | 320 | 350 |
Horizontalclearance | mm | 380 | 400 |
Height of Load Frame | mm | 1200 | 1600 |
Weight of Load Frame | Kg | 650 | 1000 |
Specimen Size (Suitable with load frame) | |||
Cube Mould | mm | 650 | 1000 |
Weight of Load Frame | Kg | 70.6, 100, 150, 200 | 70.6, 100, 150, 200 |
Cylindrical Mould | mm | 100, 150, 200, 300 | 100, 150, 200, 300 |
Motor Capacity | HP | 1HP, Single Phase 230V, 50Hz |