Concrete Testing Lab Equipment
Compression Testing Machine Four Pillar Type Load Frame Hand cum Electrical Operated

Compression Testing Machine Four Pillar Type Load Frame Hand cum Electrical Operated

Make: AMV Scientific Co.

Model: AMV-CTE-20036

Origin: India

AMV scientific are leading Compression Testing Machine Four Pillar Type Load Frame Hand cum Electrical Operated manufacturers, suppliers and exporters in Delhi, India. The load frame is made up of high-quality steel construction with a fixed. Upper lead carrying a ball seated platen. 4 pillars are fixed to the base and the top plate of the loading frame. The upper and lower plates are adjusted with the help of head screw on either side of the pillar. The ram dia of the machine varies from the requirements of the customer. The lower pattern are at the base of the frame above the ram and it is rectangular in shape. Sufficient clearance is provided between the platens to fit in the cylindrical/ cube moulds. Spacer provided to adjust cubes and cylinders.

A 20 cm dia. pressure gauge with maximum load induction pointer is fitted on the top panel and in turn is connected to the hydraulic pressure pipe. On the right hand a console is fitted within which the electrical motor is fitted along with its coupling which in turn is connected to the pumping unit. A slow / fast loading rate regulator fixed on the top of the console for adjusting the rate of loading. The machine is duly calibrated and passed after inspecting and analysing it with a compression level indicator is provided as a dip stick.

Compression Testing Machine Four Pillar Type Load Frame Hand cum Electrical Operated Features :

  • High stability four column load frame
  • Ranges: 50 kN to 3000 kN
  • Extra gauges can be attached to the machine (max. 3 nos. ), for better accuracy and results.
  • Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.
  • Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading
  • Standard Platens for 3 X 6”/ 4 X 8” and 6 X 12” cylinders included.
  • A precise large diameter spherical upper platen for optimum results
  • Variety of optional accessories for cubes, blocks, bricks and flexure test available
  • Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection
  • Comes standard with safety Guards on all four sides.
  • hand cum compression testing machine four pillar

Compression Testing Machine Four Pillar Type Load Frame Hand cum Electrical Operated Details:

  • The Complete unit comprises a Loading Unit which is of fully welded or two pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The Loading capacity is of 2000 KN, Cubes up to 200 mm & Cylinders up to 150 mm Dia X 300 mm Height can be tested using the appropriate spacers.
  • Pumping Unit with choice of compact power pack attached closely to the loading unit or separate hydraulic pumping unit, attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing.
  • Maximum load is held and retained for approx. 15 min, unless canceled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually.